CPVC Plug
CPVC PLUG:
CPVC Plugs also known as end plugs are used to terminate the flow of the fluids in the fittings. CPVC plugs are similar to the caps, the difference being that the caps are used to terminate the flow in the pipes instead of the fittings.
Plugs are attached to the fittings and have threaded ends so that they can be easily removed anytime when the connection has to be extended. That is why solvent cements are not used in this case.
CPVC FLANGES :
CPVC flanges are rim like structures with multiple slots for the bolts so that they can be joined with the flanges of other pipes or fixtures. Two flanges require a rubber gasket between them which seals the joint and make leaktight. CPVC flanges and fittings provide extra strength to the joints between two pipes and are used more frequently in pipes having larger diameters like industrial pipes, etc.
Flanges are available from 1” (25mm), 1 ¼”(32mm), 1 ½”(40mm), 2” (50mm),
2 ½”(75mm), 3” (90mm), 4” (110mm), 6” (160mm)
CPVC CLAMPS :
CPVC pipe clamps are used to provide stability to the plumbing networks by attaching pipes with the walls, suspending them from ceilings or joining them with any solid support surface. Clamps fix the pipes in place which increases the stability of the plumbing systems and results in its better functioning. Smaller clamps are available in both plastic and metal while the bigger clamps are available in powder coated metal.
Clamps are available from ½” (15mm), ¾”(20mm), 1” (25mm), 1 ¼”(32mm), 1 ½”(40mm), 2” (50mm),
2 ½”(75mm), 3” (90mm), 4” (110mm), 6” (160mm)
CPVC CROSS:
CPVC CROSS are like 4 way Tee that are capable of joining four pipes at once having either same or different diameters. In plumbing the cross connection forms one inlet and three outlets thus dividing the flow into 3 branches. All the pipes in a CPVC cross are connected at right angles to each other using solvent cements.
CPVC cross fittings are the find very little applications in the plumbing systems.
Cross are available from ½” (15mm), ¾”(20mm), 1” (25mm)
CPVC BUSH or CPVC Reducing Bush:
CPVC bush are plain bearings mainly used to reduce the size of any side of a plain CPVC fitting to any required lower size. Bushing has two sides, one male part that goes inside a female part of a fitting and second is the female part where the pipe gets attached.
Bushings provide immense flexibility to plumbers to work with any size combinations with any fitting.Bushings are available in sizes ½” upto 6” with all combinations of smaller sizes.
AJAY PIPES AND FITTINGS:
Ajay sells its CPVC pipes and Fittings under the name of Flowline plus range. These products are made of the highest quality, 100% virgin, environmentally friendly plastic. In addition to that, Ajay maintains strict high quality standards regarding all its products in order to not compromise with the quality. Products of Ajay pipes are subject to extremely rigorous testing, each batch of products undergoing multiple tests so that only the best products reach the customers.
Ajay Pipes has been a leading manufacturer of plastic pipes and fitting and is the solution to all your plumbing needs, whether you are a homeowner or a builder.
FAQs
A CPVC plug, also called an end plug, is used to terminate the flow of fluid at the end of a fitting. Unlike caps, which terminate flow at the end of a pipe, plugs have threaded ends so they can be removed later without solvent cement, in case the connection needs to be extended.
A CPVC flange is a rim-like fitting with multiple bolt slots that joins two pipes or fixtures together, with a rubber gasket between them to create a leak-tight seal. Flanges are used more frequently on larger-diameter industrial pipes and are available from 1″ (25mm) up to 6″ (160mm).
A CPVC cross, similar to a 4-way tee, joins four pipes at once, typically forming one inlet and three outlets that divide flow into three branches at right angles. CPVC cross fittings are available in ½” (15mm), ¾” (20mm), and 1″ (25mm) sizes, and see limited use in plumbing systems compared to other fittings.
A CPVC bush, or reducing bush, is a plain bearing fitting used to reduce the size of one side of a fitting to a smaller required size. It has a male part that fits inside a female fitting and a female part where the smaller pipe attaches, giving plumbers flexibility to combine different pipe sizes, available from ½” up to 6″.
CPVC pipe clamps are available from ½” (15mm) up to 6″ (160mm). Smaller clamps come in both plastic and metal, while larger clamps are made of powder-coated metal, and all are used to secure pipes to walls, ceilings, or other solid support surfaces.
For any queries, contact the plumbing experts at Ajay pipes on the Toll Free No. : 1800-11-4050 or via email at our email address info@ajaypipes.com
